So here is the orginal with my first repair then I got stuck
(http://i406.photobucket.com/albums/pp148/randomeyesight/Untitled-3.jpg)
Received some good advice from the folks at Napp on channel repair which helped.
However I'm still stuck on repairing all the small details especially the face. The more I attempt to fix it the worse it becomes. So any helpful hints or suggestions would be fanatastic. Or if it is thought this is good enough to send in, let me know that too.
Thanks
As far as I have repaired. - (http://i406.photobucket.com/albums/pp148/randomeyesight/HarmonR_29_4x4wipcopy.jpg)
Seeing as its only a 4x4 I wouldnt worry too much about the face, it should look fine on the print. I can only see a few clone marks in the grass and a few spots up on the right corner and his trousers to do. Great job on it. :up:
A slight burn along the right side of his right leg to increase it's width might be helpful and if you havn't fixed it yet that notch that's missing in his pant on the left calf. The face and the color look absolutely great!
Jane